Catch basins and storm sewer systems are vital in removing surface water runoff. Regular catch basin maintenance is important to prevent larger repairs and liabilities.
There are a few potential defects property managers should look for when performing routine inspections and cleaning of catch basins:
1. The Catch Basin is Higher than the Surrounding Asphalt
This poses a tripping hazard and causes standing water around the basin. This happens when the sub-base underneath the surrounding asphalt settles over time and the pavement becomes lower than the concrete basin. AP Enterprises can remove the surrounding asphalt and lower the basin by removing concrete rings to alter the height of the catch basin frame.
2. Sinkholes are Developing Adjacent to the Basin
This is the result of one of two things. The first is when the water erodes the stone sub-base in the surrounding asphalt. The second is when the stone base adjacent to the basin has settled and cannot support the surrounding asphalt. Depending on the extent of the damage, if may be possible to remove and replace the surrounding asphalt, or it may be necessary to replace the entire catch basin structure.
3. The Frame of the Basin has Shifted on an Angle
This occurs when the concrete rings supporting the frame have become unstable, shifted or completely eroded on one or all sides. The answer to this situation is to simply replace the rings using a proper bonding agent.
It is always better to be proactive with maintenance rather than reactive, but if you find yourself with one of the above dilemmas, you can be assured that AP Enterprises will rebuild the existing catch basin or install a new catch basin to ensure the best drainage for your asphalt. Often times, these repairs can be done easily with minimal cost and inconvenience.
AP is prepared to repair, replace or upsize any pipe any time day or night. Emergencies happen, and we are there to help!